Dayton-audio TT25-16 PUCK Tactile Transducer Mini Bass Shaker Manuel d'utilisateur télécharger pdf (Page 1)

Typical wiring configuration:

Specifications

• Power Handling:

15 watts RMS/30 watts max

• 4 Layer Voice Coil

• 1" Aluminum Former

PUCK

TT25-16

Overview: The Dayton Audio PUCK™ is a small tactile transducer intended

to be used in Home Theater, Gaming, and Auto Sound applications. Its

unique ability to transfer low frequency sound waves directly to the listener is

achieved by mounting the PUCK™ to surface areas that a listener's body will

come into contact with. Because the listener "feels" the low frequency, the

volume of the overall sound can be kept to a minimum without sacrificing the

audio quality.

Mounting: The PUCK™ is designed to slide into a 70mm hole (with notch

area for wiring). Please use the template below for a suggested hole cut.

NOTE: Wiring information is found on the back of this sheet.

THE TM

25 mm

12 mm

70 m

Use 6 #6 Wood or Sheet Metal Screws to mount on surface

• Use standard wire nuts to join wires.

• If possible, always pre-wire prior to permanent mounting.

• Verify and match the impedance of any receiver/amplifier shown

in the diagram above.

• Should you have any questions regarding wiring or installation,

contact your place of purchase.

WARRANTY

The Dayton Audio TT25-16 is warranted free from defects in material and

workmanship for one year from date of purchase. Warranty does not apply

to misuse, neglect, accident, or improper use.

Typical wiring configuration: Specifications • Power Handling: 15 watts RMS/30 watts max • 4 Layer Voice

Pas de commentaire

Dayton-audio TT25-16 PUCK Tactile Transducer Mini Bass Shaker Manuel d'utilisateur Page 1